Level III A acc.toN.I.J. 0101.06 (SR 4 -acc.toSTP-M 40202-99) without ballistic plates inserted -9 x 19 mm Parabellum; .44 Magnum;To get more news about bulletproof tactical helmet, you can visit bulletproofboxs.com official website.

-Level IV acc.toN.I.J. 0101.06 (SR 8 -acc.toSTP-M 40202-99) with ballistic plates inserted in vest IIIA (SR5) -7.62 mm x 51mm API / 7.62 x 54mm API;
Removable bullet-proof collar to ballistically protect the portion between the bullet-proof helmet visor and bullet-proof vest, level IIIA in accordance with NIJ Standard 0101.06-2008, SR 4 according to STP-M 40202-99. The collar inner face material must be fine, antiallergic with high resistance to scratch-friction with the beard;
Detachable bullet-proof protection for the shoulder and arm areas must have a concave anatomical shape to embrace the humeral joint as much as possible, level IIIA in accordance with NIJ Standard 0101.06-2008, SR4 according to STP-M 40202-99 to allow simultaneous mobility and protection;
Detachable bullet-proof protection for thegroin are, made of twopieces, oneanchored to the waist and the other through aVelcro® type strap (sizes: minimum 240 mm x 240 mm), IIIA level according to NIJ Standard 0101.06-2008 , SR4 according to STP-M 40202-99 or equivalent;
The vest has a modular construction;
It allows the removal of protective shoulders, inguinal protection and protective collar;
The outer cover material is made of corduraabrasion-and friction-resistant material and provides resistance against the action of chemicals, petroleum products and fire;
Fast enlarging system, resistant to the vest loading by 30 kg, allowing the left or right positioning and protected against accidental operation with a Velcro® textile cover that closes on the body;
Adjustment system for adjusting the vest to the waist and on the height of the user with velcro® strap type;
Vest waist closure system by bringing back side extensions forward and fastening with Velcro® strap; this system will be covered by a textile cap fastened with the Velcro® type strap and provided with a MOLLE system to attach different types of pockets to the outside;
Rubber straps are provided on the shoulders of the waist for the adhesion of the butt of the gun;
The bulletproof vest isprovided with front and back pockets for fitting / inserting the ballistic protection plate. The pockets are provided with Velcro® closed caps specified at 320 x 270 mm;

It is equipped with a back-mounted rescue / towing strap with a breaking strength of 200 kg
It features an air circulation system to enhance comfort made of a 8-9 mm thick synthetic honeycomb fabric;
Measures of the vest and surface ballistic packs acc. to N.I.J.0101.06.