Failure Analysis And Maintenance Of Friction Lining Materials

Friction lining materials are widely used in machinery and automobile industries, and friction lining materials will inevitably have failures during use. Therefore, how to eliminate lining failures?Get more news about friction lining producer,you can vist our website!

The back will come off. For this phenomenon, there are mainly two situations: the first is that the back plate and the friction material have cracks; the second is that the friction material itself has cracks. These two aspects cause the backplate to fall off. Therefore, to solve this problem, do not use high temperature-related operations, and do not use incorrect installation methods, so as to effectively avoid the phenomenon that the back of the friction plate material falls off.

Slow braking phenomenon is also a recurring problem. If the brakes are lagging, you need to check the springs to see if there is a problem. The gap between the brake pads and the brake disc is also affected, so the gap gap should be adjusted accordingly.

Newly installed brake pads will also appear soft brakes. The main reason for this phenomenon is that the brake friction lining is not a composite standard, and the brake disc needs to be replaced. The surface of the brake disc is not cleaned in time, which is also a reason, so keep it clean.