If your Epson printer is not connecting to a new Wi-Fi network, there are several troubleshooting steps you can take to resolve the issue. To know more about epson printer won't connect to new wifi. Here's a step-by-step guide:

  1. Check Wi-Fi Settings on the Printer:

    • Make sure the printer is turned on.
    • Access the printer's control panel or display screen and navigate to the Wi-Fi or Network settings.
    • Verify that the printer is set to the correct Wi-Fi network and that the password is entered correctly.

  2. Restart the Printer:

    • Turn off the printer and unplug it from the power source.
    • Wait for about 1-2 minutes, then plug it back in and turn it on.
    • Allow the printer to initialize and try connecting to the Wi-Fi again.

  3. Restart the Router:

    • Turn off your Wi-Fi router and wait for a minute before turning it back on.
    • Once the router is fully restarted, try connecting the printer to the Wi-Fi network again.

  4. Check Wi-Fi Signal Strength:

    • Ensure that the printer is within the range of the Wi-Fi signal.
    • If the signal is weak, consider moving the printer closer to the router.

  5. Update Printer Firmware:

    • Check if there are any firmware updates available for your printer on the Epson support website.
    • If updates are available, follow the instructions to update the firmware.

  6. Reconfigure Wi-Fi Settings:

    • If the printer has a WPS (Wi-Fi Protected Setup) button, you can try using it to quickly connect to the Wi-Fi network.
    • Alternatively, you may need to access the Wi-Fi setup wizard on the printer to enter the new Wi-Fi credentials.

  7. Remove and Re-add the Printer:

    • On your computer, go to the list of installed printers.
    • Remove the existing Epson printer and then add it again, providing the correct Wi-Fi details during the setup process.

  8. Check for Interference:

    • Other electronic devices, such as cordless phones or microwave ovens, may cause interference with the Wi-Fi signal. Make sure the printer is not placed near such devices.

  9. Reset Network Settings:

    • Some printers have an option to reset network settings to default. Consult your printer's manual to find out how to do this.

  10. Contact Epson Support:

    • If all else fails, consider reaching out to Epson customer support for further assistance. They may provide specific guidance based on your printer model. To know more about epson printer not connecting to wifi network.

Remember to consult your printer's manual for model-specific instructions. If the issue persists, Epson support can offer tailored assistance for your particular printer model.