Electric bikes have taken the United States by storm in recent years for their advanced technology and ability to help people ride further without a lot of effort. If you want to commute faster without getting stuck in traffic, your best bet is an e-bike, but people want more than that. Electric mountain bikes are the latest innovation in the cycling industry, offering users a new way to commute and enjoy cycling on their bikes—not just on urban tarmac, but with the ability to traverse difficult terrain and steep hills, and because of this, more and more people are deciding to switch to electric mountain bikes, especially the full suspension electric mountain bike.

As a competent rider, a quick review of your electric mountain bike before every ride is very important to your riding experience, especially considering that you’re likely to use it a lot climbing steep hills and taking sharp turns on dirt roads, which is really Can help you reduce the risk of accidents while riding. If you don’t already know how, read on and you’ll know how to properly do a quick pre-ride inspection of your bike, and to make it easier to remember, we’ve broken it down into 5 key points in your inspection sequence, I hope it can help you after reading it.

Point 1: Check tire pressure

If you are an experienced cyclist, you should know that tire pressure can be the key to whether or not we have a comfortable ride, so be sure to check and inflate your tires before every ride. Usually, you can roughly judge whether the tire needs to be inflated by directly squeezing it with your hands. Of course, if you are an electric bike rider who is not very experienced, this may not be accurate, you can choose a professional pressure gauge for testing.

Some beginners will think that the bike can go faster with higher pressure, but this does not apply to all situations, in fact, it depends on a lot of conditions and how you set up your bike. In addition, different models or brands of tires may have different tire pressure requirements. You’d better check the tire manual before testing or pumping up air.

Point 2: Check the handlebars

The handlebar determines whether we can master our balance and avoid danger in time, so you must make sure it is in good condition before riding. This involves putting your bike on the ground, then raising the front of the bike to about ankle height, and finally lowering it down, listening for any odd noises.

After completing the steps above, turn the handlebars again to make sure the stem and handlebars are tight enough, especially on bikes with adjustable handlebars, these steps are critical.

Point 3: Check the seat post and saddle

You need to make sure the seat post clamp is secure, you can move the seat post up to the saddle and twist it side to side, after that, put your best electric mountain bike on the ground, lift and lower the rear from about ankle height, listen carefully to check for He makes strange noises, which helps to check if any parts are loose or worn, and is very simple and effective.

Point 4: Check the crankset

Congratulations you are more than halfway there, now we need to check the crankset. First just rotate both pedals and check for any squeaking or other sounds. Then, check for any play in the pedal or crank system by grabbing both pedals and twisting them side to side. Finally, turn the crank back and listen carefully for any squeaking from the chain or shifting system.

Point 5: Check tire condition

As a component that is in direct contact with the ground, the importance of tires is self-evident, and it is even directly related to our riding safety. Although we checked the tire pressure at the beginning, it was not enough. Especially for outdoor sports enthusiasts, it is always inevitable to ride their electric mountain bikes on rough roads such as grasslands and mountains, and it is easy to encounter various hard substances to cause damage to the tires. Therefore, before riding, pay attention to check whether there are small stones, broken glass and other substances stuck on the tires and clean them up in time. At the same time, it is also necessary to check the health of the tire itself. For example, if there are obvious scratches on the surface of the tire, even if the scratches are small, we recommend that you do not ride forcibly, wait until the scratches are dealt with, or replace with new tires before starting your riding plan.

The above are the 5 key points that we must check before every ride. Of course, this is not all. If you want to be safe, you can also check the brakes, accelerator, speedometer, headlights, bicycle rear view mirror and other components. Electric mountain bikes have always amazed us, and their development is far from over thanks to technological advancements, but whenever you do, make sure everything is working properly before you ride.