This is the one manual method of the Linksys Range Extender Setup. So primarily you need to connect the linksys range extender to the wall plug. Then it’s time to connect the ethernet wire to the extender. There is one more alternative available for your Linksys WiFi connection as you can do it directly with the networks. Web connection will go lost in both connections for a while. Look on the other side as well of the router as it should also be set on “Extender mode”. “Access Point ” is made to connect your WiFi devices directly to your modem. It may need a few minutes to boot up. Now it's time to open the web browser on the laptop or the computer. Web browsers like Chrome or Edge. To enter the address for the web-based interface use the simple numerical that is 192.168.1.1. A login prompt will appear. If the IP address is also not working for the Setup then, you can use the address that has come along with the device on its back. If the hard copy of your device is not findable no worries, it might be written for sure on the bottom of the device.